Cyclone C Series

Cyclone C Series

Description

C Series Cyclone Dust Filter

The most effective way to remove large contaminants from your plant.

High efficiency cyclone separator

The cyclone dust filter has an airflow capacity ranging from 800 to 13,000 CFM. High efficiency is achieved by using a long, slender cone. high speed entrance and welding threads of the unit Dirty air enters the machine at high speed. Then it will spiral into a spiral. By throwing particles to hit the walls of the cone. Centrifugal force pushes larger or heavier dust particles down through the narrow section of the hopper and into the collection tank or hopper. Clean air flows back up to the center of the unit. and released back into the atmosphere or into genuine replacement filters for further processing. 

Usage

• Polishing
• bulk powder
• Conveying
• Fiberglass/Plastic
• Grind
• machinery
• polish
• saw
• woodworking

Options

A comprehensive range of options and accessories are available to enhance the performance of your C Series cyclone dust collector. Some of these include:

• blast vent
  • Minimizes damage and provides a level of personal protection in the event of an explosion that may occur when collecting explosive dust.
• soundproof package
  • Ducted fan silencers and soundproof foam help reduce the unit's noise level.
• Full welded construction
  • Provides complete vacuum sealing to meet specifications.

jewelry

• entrance door
• Aluminum fan wheel
• Tank cover/slide door latch set
• explosion proof motor
• explosion vent
• Tank spacing increased
• leg extension
• The room divider panel has a lining.
• Motor options 208/3/60
• Move the exit
• Water nozzle
• stainless steel
• Starter panel with fuse disconnection system
• Throw away the trash

AF and C series

For installing cyclones in buildings Offering genuine AF series replacement filters, these replacement filters bolt directly onto the cyclone air outlet. Or install remotely using interconnecting pipes. Genuine AF-Series replacement filters contain up to 24 10 ounces of polyester felt zippered filter tube.

Another option is the C Series replacement filter, which can be installed inside or outside your facility. These units are connected remotely to the cyclone by hose and poured into a 55 gallon tank. Standard filter size 9 ounces. Polyester felt bag. Outdoor C Series units are designated with “W” for weatherproof enclosure. and is built using epoxy-coated cold-rolled steel for the harshest environments. A representative can help you determine which replacement filter is best for your specific application.

Customized system

Cyclone C Series A variety of configurations are available to help meet your company's industrial air cleaning needs. Select the direction of the entrance and exit areas. Vent clean air back into the factory or outside the building. Or choose to use only the cyclone or change the filter.

Different industrial applications produce different amounts of dust and debris and therefore offer a variety of emissions options. for small quantity You can choose between 30 and 55 gallon size tanks that can be configured under the cyclone unit as a single or double tank. for large loads You may choose to use the C60H tank model, which has a capacity of 60 tanks. ft3 or C110H load-bearing models 110 ft3 Additionally, you can add a rotating airlock to your system to continuously vent dust from the dustbin to an external dust container.

energy efficiency

C series cyclone fans are self-cleaning. Radial blades for handling materials Designed to provide maximum airflow with low horsepower to save energy. All models can be installed indoors or outdoors. And clean air can be returned within your factory. If the cyclone is equipped with a replacement filter 

Discharge options