PCN Series Portable

PCN Series Portable

Description

It is portable and efficient.

Capture pollution from the source:

Using electrostatic precipitator (ESP) technology PCN is therefore applied to welding fumes containing oil. Metal oxide smoke and fog applications, because particles are captured by selective extraction. entrance sleeve or sleeve, the ESP collection cell charges Electrolytic very small contaminants Then it traps those contaminants. very magnetic The pre-filter is easy to clean and reusable. ESP Collection Components Aluminum Primary Filter Reduces maintenance and costs for filter replacement and disposal. very much And because each collection cell can hold more than a pound of welding oxide fume. before cleaning Maintenance time is therefore shortened.
The swing arm captures the source and the exhaust hood is positioned. directly over the smoke, mist or smoke source to eliminate Dangerous contaminants that can cause respiratory problems and create Safety and Maintenance Concerns – Potential Breakdown Situations Working time, workers' compensation and compliance  violation

Features and Benefits:

• Reduce the need for makeup air. with cleaning and circulate air
• Ventilate clean air through Vertical air vents by releasing Exhaust towards the ceiling on behalf of the user
• Reduce maintenance costs By eliminating smoke and fog and smoke before the particles builds up on equipment and surface work
• Help to follow Quality standards The indoor air of
• Special XA armband design Make PCN have Efficiency in capturing smoke and smoke even more
• Bell-shaped exhaust hood Captures smoke far than the range hood Design Other

Specifications:

1. Cabinet – Constructed from 16 gauge welded steel with internal structural rails on top and bottom. Hinged doors with power interlock safety devices provide access to components. of the collection. Access panel provides access to the motor/blower compartment for easy adjustment. The cabinet was supplied with a phosphate wash cycle. The final coat is a polyurethane powder paint that is electrostatically baked to ensure a durable hard coating.
2. Pre-Filter – Heavy-duty, reusable filter. Constructed from layered expanded aluminum mesh contained in an aluminum frame.
3. Ionizer – Constructed from an extruded aluminum air foil frame that shields the ceramic insulator from drafts. Each tungsten ionization wire is spring-mounted from a die-formed support rod. Contact with the high voltage source is made through a con.act spring without mechanical connections.
4. Collection Cell – has a surface area of 20,160 square inches and is constructed from specially machined aluminum to maximize collection efficiency. Rods are inserted for rigidity and to control the distance between the high voltage and the ground plate. The insulation is protected from drafts by a reversible end plate. Contact with the high voltage source is made through contact springs, which do not require mechanical connection. The collection cell weighs 29 pounds and has a riveted steel handle. This allows them to be easily removed for periodic inspection and cleaning.
5. Power Supply Unit – Provides 11,000 volts DC power to the ionizer and 6,000 volts DC (nominal value) to the collection cell. Self-regulating power supply for varying the input voltage from -30% to +13% of rated rating.
6. Motor/Blower – Create air movement with a belt-driven centrifugal blower with sealed ball bearings and cast iron pulleys. Blower driven by 1/2 or 1 HP motor for heavy duty applications. The motor/blower has an adjustable base to facilitate seNicing. A variable pitch pulley is used with the motor to achieve RPM variation.
7. Wire – 10 ft. 16 gauge 3SJ with molded plug.
8. Dust Drawer – Removable drawer to collect falling dry particles.
9. Optional Swing Arm Assembly – XA Source Arm with Diameter 8 inches, Length 7 / 10 / 12 Feet. Easily adjustable source swing arm.