Gas burner / radiantmax. 75 mbar | RAD-2

คุณสมบัติ Radiant energy is well known used in industrial drying processes and treatment of material such as paper, glass and steel or copper strip; besides it is well know that radiant energy has an ideal wave lenght, in the most of these processes, on infrared range between 2 and 6 microns. These radiations pierce into material to be treat more easily than any other radiation and, in comparison with the ones produced by a tradizional convection system, they are more suitable in processes in which uniformity is required. Standard combustion chamber are lacking in these radiation, so on industrial application metallic shields or made using metal or special refractory material are used; they give out radiation with the required wave lenght if they are heated to a particular temperature (for metallic shield, 760°C÷870°C). In optimal tempetature condition, about 92% of radiated energy is included in required wave lenght range. RAD-2- burner is usually used on glass bending furnaces; the special shape of nozzle and flame shield let hold combustion products near nozzle. This geature is very important for having a good radiative heating. Capacity regulation of this burner is useful not for change temperature in combustion chamber, but for change radiant area. Burner หัวพ่นไฟ คุณภาพสูง ถูกออกแบบมาให้มี ประสิทธิภาพสูง ประหยัดพลังงานและแป็นมิตรกับสิ่งแวดล้อม สามารถใช้เชื้อเพลิงได้ทั้ง NGและLPGซึ่งเหมาะสมกับ งานอุตสาหกรรมที่ต้องการความร้อนในทุกประเภท เช่น Boiler,Oven,Heat Exchamger,Rubber Oven,Stell Furnace

คุณสมบัติ Radiant energy is well known used in industrial drying processes and treatment of material such as paper, glass and steel or copper strip; besides it is well know that radiant energy has an ideal wave lenght, in the most of these processes, on infrared range between 2 and 6 microns. These radiations pierce into material to be treat more easily than any other radiation and, in comparison with the ones produced by a tradizional convection system, they are more suitable in processes in which uniformity is required. Standard combustion chamber are lacking in these radiation, so on industrial application metallic shields or made using metal or special refractory material are used; they give out radiation with the required wave lenght if they are heated to a particular temperature (for metallic shield, 760°C÷870°C). In optimal tempetature condition, about 92% of radiated energy is included in required wave lenght range. RAD-2- burner is usually used on glass bending furnaces; the special shape of nozzle and flame shield let hold combustion products near nozzle. This geature is very important for having a good radiative heating. Capacity regulation of this burner is useful not for change temperature in combustion chamber, but for change radiant area. Burner หัวพ่นไฟ คุณภาพสูง ถูกออกแบบมาให้มี ประสิทธิภาพสูง ประหยัดพลังงานและแป็นมิตรกับสิ่งแวดล้อม สามารถใช้เชื้อเพลิงได้ทั้ง NGและLPGซึ่งเหมาะสมกับ งานอุตสาหกรรมที่ต้องการความร้อนในทุกประเภท เช่น Boiler,Oven,Heat Exchamger,Rubber Oven,Stell Furnace